Jump to content

Photo

Bristleback Sharp + Auto last hit quill spray

Bristleback

  • Please log in to reply
23 replies to this topic

#1
spyware293

spyware293

    Advanced Member

  • Contributor
  • 199 posts

Bristleback Sharp

day_2__bristleback_by_cedalcalde-d7v029h

Features

  • Auto use quill spray (Max mode = spam quill to maximize ulti, Smart mode = Use quill when enemy in quill spray range, Farm mode = Auto last hit lane creep with quill)
  • Chase mode (Hold "space" and move your cursor near enemy to target)
  • Minimize delay between using nasal goo and normal atk (In chase mode)
  • Combo with item
  • Automatically dust while chasing invis target

To-Do List

  • Add more items

Update Logs

  • 1.0.0.0 First Release
  • 1.0.0.1 Fix cancel channeling and invis while on max mode
  • 1.0.2.0 Smart quill mode and atos item added
  • 1.0.3.0 Auto last hit with quill (farm mode) and Aghanim added
  • 1.0.3.1 Fix BB Aghs not chasing

GITHUB | INSTALL


Edited by spyware293, 10 January 2017 - 05:02 PM.

  • 6

#2
Kurnulli

Kurnulli

    Advanced Member

  • Member
  • PipPipPip
  • 39 posts

Thanks! I will test it


  • 0

#3
ForumTestingPolice

ForumTestingPolice

    RIP ExorPrediction

  • Subscriber
  • 1041 posts

Has menu?


  • 0

RIP ExorPrediction, you will be missed. 

 

Birth of ExorPrediction: 

 

Spoiler

 

The God himself!

Spoiler

 

ExorPred following:

Spoiler

 

 

Picture of ShiroSuigintou confirmed :kappa:

Spoiler

#4
jokers1990

jokers1990

    Advanced Member

  • Member
  • PipPipPip
  • 68 posts

cancels channeling while on max mode eg: tp, invi. The rest works quite well i think.


  • 0

#5
spyware293

spyware293

    Advanced Member

  • Contributor
  • 199 posts

cancels channeling while on max mode eg: tp, invi. The rest works quite well i think.

Fixed

 

Has menu?

Yes


  • 0

#6
Rekt

Rekt

    R.I.P 5.20 Banwave

  • Member
  • PipPipPip
  • 380 posts

Nice, finally a script that doesn't require you to hold weird key to combo. Going to give it a whirl, thanks.

 

 

Edit: Tried it, and it works good.


Edited by Rekt, 28 November 2015 - 06:26 PM.

  • 0

#7
demonz22

demonz22

    Advanced Member

  • Member
  • PipPipPip
  • 86 posts
  • LocationArgentina Buenos Aires

nice script!! you can add auto treads ?


  • 0

3d-gifs-02.gif


#8
abdulrehman

abdulrehman

    Advanced Member

  • Member
  • PipPipPip
  • 66 posts
Space bar is also for orb walking ... which I think is needed on every hero as it is an insane script .... credits: Moones.... so when ever I want to retreat and also quil at the same time it does not work ... and also in the menu it doesn't have an option to change the hot key(needs an immediate fix) ... over all good script .. needs more logic than just Brute code ... BB is an easy hero.... the only thing required is logic than the timing ... please improve that ... no offence intended . . But this is a good script overall ... if you know basics of dota 2 u can get a rampage with this script easily
  • 0

#9
spyware293

spyware293

    Advanced Member

  • Contributor
  • 199 posts

nice script!! you can add auto treads ?

You can use other assembly to do that, including more features which other assembly already provided will make this script slower

Space bar is also for orb walking ... which I think is needed on every hero as it is an insane script .... credits: Moones.... so when ever I want to retreat and also quil at the same time it does not work ... and also in the menu it doesn't have an option to change the hot key(needs an immediate fix) ... over all good script .. needs more logic than just Brute code ... BB is an easy hero.... the only thing required is logic than the timing ... please improve that ... no offence intended . . But this is a good script overall ... if you know basics of dota 2 u can get a rampage with this script easily

Yes, quill smart mode will be added soon (Only spam quill when enemy hero is near / range 1000) and hotkey for menu too


  • 0

#10
wiredgizmo

wiredgizmo

    Newbie

  • Member
  • Pip
  • 8 posts

The last bristleback script had hold key to auto last hit with quill spray. If you could add that, it would be awesome!!

Thanks!


  • 0

#11
spyware293

spyware293

    Advanced Member

  • Contributor
  • 199 posts

script updated


  • 0

#12
guime

guime

    Advanced Member

  • Member
  • PipPipPip
  • 35 posts

Working with aghs? 
Last hit with quill would be nice
An option to select combo hotkey
Auto Turn back when facing huge damage skills

Thats one of my favorite scripts, thank you!!


  • 0

#13
spyware293

spyware293

    Advanced Member

  • Contributor
  • 199 posts

Working with aghs? 
Last hit with quill would be nice
An option to select combo hotkey
Auto Turn back when facing huge damage skills

Thats one of my favorite scripts, thank you!!

script updated now working with aghs, Farm mode added / auto quill last hit.


  • 1

#14
ice5050

ice5050

    Member

  • Member
  • PipPip
  • 25 posts

Oh thanks very much, farm mode is what I'm looking for :)


  • 0

#15
guime

guime

    Advanced Member

  • Member
  • PipPipPip
  • 35 posts

script updated now working with aghs, Farm mode added / auto quill last hit.

Gratz for the great work here, I'll keep sending feedbacks to improve. Ty!

@edit
Test and farming is working fine!!
Another ideia is to add hot keys to farming, combo and max quilll, like #Zeus (https://www.joduska....rawstargetting/).
In this script when u hold the farm key, farm script is active. I think its better than keep switching in menu.


Edited by guime, 26 December 2015 - 12:57 PM.

  • 0

#16
ownagepranks

ownagepranks

    Advanced Member

  • Member
  • PipPipPip
  • 236 posts

change hotkey option


  • 0

#17
ReNNo

ReNNo

    Advanced Member

  • Member
  • PipPipPip
  • 42 posts
  • LocationUSA

Thank you for script.

 

But it misses every last hit with quil spray. 1 hit away from death. Can you fix it please?


  • 0

  lpauod6f6fd.png


#18
alkhair31

alkhair31

    Member

  • Member
  • PipPip
  • 17 posts

Hello someone Help me please :(  

 

 

Build started 1/9/2016 2:09:27 AM.

__________________________________________________
Project "C:\Users\officialsaul\AppData\Roaming\LSB4B57207\Repositories\58978228\trunk\Bristleback Sharp\Bristleback Sharp\Bristleback Sharp.csproj" (default targets):
 
Target GetReferenceAssemblyPaths:
C:\Program Files (x86)\MSBuild\14.0\bin\Microsoft.Common.CurrentVersion.targets(1097,5): warning MSB3644: The reference assemblies for framework ".NETFramework,Version=v4.5.2" were not found. To resolve this, install the SDK or Targeting Pack for this framework version or retarget your application to a version of the framework for which you have the SDK or Targeting Pack installed. Note that assemblies will be resolved from the Global Assembly Cache (GAC) and will be used in place of reference assemblies. Therefore your assembly may not be correctly targeted for the framework you intend.
Done building target "GetReferenceAssemblyPaths" in project "Bristleback Sharp.csproj".
Target PrepareForBuild:
Creating directory "bin\Release\".
Creating directory "obj\Release\".
Target ResolveAssemblyReferences:
Primary reference "Ensage".
C:\Program Files (x86)\MSBuild\14.0\bin\Microsoft.Common.CurrentVersion.targets(1819,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "Ensage". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
For SearchPath "{HintPathFromItem}".
Considered "C:\LeagueSharp\System\Ensage.dll", but it didn't exist.
For SearchPath "{Registry:Software\Microsoft\.NETFramework,v4.5.2,AssemblyFoldersEx}".
Considered AssemblyFoldersEx locations.
For SearchPath "{GAC}".
Considered "Ensage", which was not found in the GAC.
For SearchPath "{RawFileName}".
Considered treating "Ensage" as a file name, but it didn't exist.
For SearchPath "bin\Release\".
Considered "bin\Release\Ensage.winmd", but it didn't exist.
Considered "bin\Release\Ensage.dll", but it didn't exist.
Considered "bin\Release\Ensage.exe", but it didn't exist.
Primary reference "Ensage.Common".
C:\Program Files (x86)\MSBuild\14.0\bin\Microsoft.Common.CurrentVersion.targets(1819,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "Ensage.Common". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
For SearchPath "{HintPathFromItem}".
Considered "C:\LeagueSharp\System\Ensage.Common.dll", but it didn't exist.
For SearchPath "{Registry:Software\Microsoft\.NETFramework,v4.5.2,AssemblyFoldersEx}".
Considered AssemblyFoldersEx locations.
For SearchPath "{GAC}".
Considered "Ensage.Common", which was not found in the GAC.
For SearchPath "{RawFileName}".
Considered treating "Ensage.Common" as a file name, but it didn't exist.
For SearchPath "bin\Release\".
Considered "bin\Release\Ensage.Common.winmd", but it didn't exist.
Considered "bin\Release\Ensage.Common.dll", but it didn't exist.
Considered "bin\Release\Ensage.Common.exe", but it didn't exist.
AssemblyFoldersEx location: "{Registry:Software\Microsoft\.NETFramework,v4.5.2,AssemblyFoldersEx}"
C:\Program Files (x86)\Reference Assemblies\Microsoft\MSBuild\v14.0
C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\ReferenceAssemblies\v4.0\
C:\Program Files (x86)\MSBuild\Microsoft.Cpp\v4.0\Platforms\Win32\
C:\Program Files (x86)\MSBuild\Microsoft.Cpp\v4.0\
C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\PublicAssemblies\
C:\Program Files (x86)\Common Files\Microsoft Shared\VS7DEBUG\Program Files\Reference Assemblies\Microsoft\VSTA30\v11.0\.NET2.0\
C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\ReferenceAssemblies\v2.0\
C:\Program Files (x86)\Common Files\Microsoft Shared\MSEnv\PublicAssemblies\
C:\Program Files (x86)\Microsoft Chart Controls\Assemblies
Done building target "ResolveAssemblyReferences" in project "Bristleback Sharp.csproj".
Target GenerateBindingRedirects:
No suggested binding redirects from ResolveAssemblyReferences.
Target GenerateTargetFrameworkMonikerAttribute:
Skipping target "GenerateTargetFrameworkMonikerAttribute" because all output files are up-to-date with respect to the input files.
Target CoreCompile:
C:\Program Files (x86)\MSBuild\14.0\bin\csc.exe /noconfig /nowarn:1701,1702 /nostdlib+ /platform:x86 /errorreport:prompt /warn:4 /define:TRACE /highentropyva+ /reference:C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.CSharp\v4.0_4.0.0.0__b03f5f7f11d50a3a\Microsoft.CSharp.dll /reference:C:\Windows\Microsoft.NET\Framework\v4.0.30319\\mscorlib.dll /reference:C:\LeagueSharp\System\SharpDX.Direct3D9.dll /reference:C:\LeagueSharp\System\SharpDX.dll /reference:C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll /reference:C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Data.DataSetExtensions\v4.0_4.0.0.0__b77a5c561934e089\System.Data.DataSetExtensions.dll /reference:C:\Windows\Microsoft.Net\assembly\GAC_32\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll /reference:C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll /reference:C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Net.Http\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Net.Http.dll /reference:C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll /reference:C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml.Linq\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.Linq.dll /reference:C:\Windows\Microsoft.Net\assembly\GAC_MSIL\WindowsBase\v4.0_4.0.0.0__31bf3856ad364e35\WindowsBase.dll /debug:pdbonly /filealign:512 /optimize+ /out:"obj\Release\Bristleback Sharp.exe" /subsystemversion:6.00 /target:exe /utf8output Program.cs Properties\AssemblyInfo.cs "C:\Users\officialsaul\AppData\Local\Temp\.NETFramework,Version=v4.5.2.AssemblyAttributes.cs"
Program.cs(3,7): error CS0246: The type or namespace name 'Ensage' could not be found (are you missing a using directive or an assembly reference?)
Program.cs(4,7): error CS0246: The type or namespace name 'Ensage' could not be found (are you missing a using directive or an assembly reference?)
Program.cs(5,7): error CS0246: The type or namespace name 'Ensage' could not be found (are you missing a using directive or an assembly reference?)
Program.cs(6,7): error CS0246: The type or namespace name 'Ensage' could not be found (are you missing a using directive or an assembly reference?)
Program.cs(31,45): error CS0246: The type or namespace name 'WndEventArgs' could not be found (are you missing a using directive or an assembly reference?)
Program.cs(14,24): error CS0246: The type or namespace name 'Ability' could not be found (are you missing a using directive or an assembly reference?)
Program.cs(15,24): error CS0246: The type or namespace name 'Hero' could not be found (are you missing a using directive or an assembly reference?)
Program.cs(16,24): error CS0246: The type or namespace name 'Item' could not be found (are you missing a using directive or an assembly reference?)
Program.cs(19,33): error CS0246: The type or namespace name 'Menu' could not be found (are you missing a using directive or an assembly reference?)
Done building target "CoreCompile" in project "Bristleback Sharp.csproj" -- FAILED.
 
Done building project "Bristleback Sharp.csproj" -- FAILED.
 
Build FAILED.
 
C:\Program Files (x86)\MSBuild\14.0\bin\Microsoft.Common.CurrentVersion.targets(1097,5): warning MSB3644: The reference assemblies for framework ".NETFramework,Version=v4.5.2" were not found. To resolve this, install the SDK or Targeting Pack for this framework version or retarget your application to a version of the framework for which you have the SDK or Targeting Pack installed. Note that assemblies will be resolved from the Global Assembly Cache (GAC) and will be used in place of reference assemblies. Therefore your assembly may not be correctly targeted for the framework you intend.
C:\Program Files (x86)\MSBuild\14.0\bin\Microsoft.Common.CurrentVersion.targets(1819,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "Ensage". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\14.0\bin\Microsoft.Common.CurrentVersion.targets(1819,5): warning MSB3245: Could not resolve this reference. Could not locate the assembly "Ensage.Common". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
Program.cs(3,7): error CS0246: The type or namespace name 'Ensage' could not be found (are you missing a using directive or an assembly reference?)
Program.cs(4,7): error CS0246: The type or namespace name 'Ensage' could not be found (are you missing a using directive or an assembly reference?)
Program.cs(5,7): error CS0246: The type or namespace name 'Ensage' could not be found (are you missing a using directive or an assembly reference?)
Program.cs(6,7): error CS0246: The type or namespace name 'Ensage' could not be found (are you missing a using directive or an assembly reference?)
Program.cs(31,45): error CS0246: The type or namespace name 'WndEventArgs' could not be found (are you missing a using directive or an assembly reference?)
Program.cs(14,24): error CS0246: The type or namespace name 'Ability' could not be found (are you missing a using directive or an assembly reference?)
Program.cs(15,24): error CS0246: The type or namespace name 'Hero' could not be found (are you missing a using directive or an assembly reference?)
Program.cs(16,24): error CS0246: The type or namespace name 'Item' could not be found (are you missing a using directive or an assembly reference?)
Program.cs(19,33): error CS0246: The type or namespace name 'Menu' could not be found (are you missing a using directive or an assembly reference?)
3 Warning(s)
9 Error(s)
 
Time Elapsed 00:00:00.13

  • 0

#19
dawaisuka

dawaisuka

    Advanced Member

  • Member
  • PipPipPip
  • 41 posts

works great


Edited by dawaisuka, 31 July 2016 - 11:21 PM.

  • 0

ie.gif?w=305&h=174chrome.gif?w=299&h=168


#20
a5chaura

a5chaura

    Newbie

  • Subscriber
  • 3 posts

How do you stop auto quill spray, coz at starting you dont have enough mana.


  • 0